双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

NXU0101GW

1-bit dual-supply buffer/level translator with Schmitt-trigger; 3-state

The NXU0101 is a 1-bit, dual-supply level translating buffer with Schmitt-trigger input and 3-state output. It features one data input (A), one data output (YB), and an output enable input (OE).

Both VCCA and VCCB can be supplied at any voltage between 0.9 V and 5.5 V making the device suitable for translating between any of the voltage nodes (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V).

This device facilitates asynchronous communication between data buses. Transmit data with a fixed direction (unidirectionally) from the A bus to the B bus on one channel. The OE pin can be referenced to VCCA and VCCB domain and when OE pin is set LOW the output is disabled and enter a high-impedance OFF-state which isolates the buses. The OE pin can be left floating or externally pulled down to ground to ensure the high-impedance state of the output during power up or power down.

This device ensures low static and dynamic power consumption across the entire supply range and is fully specified for partial power down applications using IOFF. The IOFF circuitry prevents potentially damaging backflow current through the device when it is powered down or if one of the power supplies is disconnected (floating).

No power supply sequencing is required and output glitches during power supply transitions are prevented. As a result, glitches will not appear on the output for supply transitions during power-up/down.

Features and benefits

  • Wide supply voltage range:

    • VCCA: 0.9 V to 5.5 V

    • VCCB: 0.9 V to 5.5 V

  • Low power consumption for supply voltage range 1.1 V to 5.5 V
    • 3 µA (Tamb = 25 °C)
    • 5 µA (Tamb = -40 °C to +125 °C)
  • Schmitt-trigger inputs with integrated static high ohmic pull-down resistor on the input

  • Maximum data rates:

    • 250 Mbps (≥ 1.8 V to 5 V translation)

  • High output drive 12 mA at 5 V

  • Output enable (OE) allows connection to VCCA or VCCB domain

  • Suspend mode when either one of the supply voltages is below 100 mV or disconnected (floating)

  • Low noise overshoot and undershoot <10% of VCCO

  • IOFF circuitry provides partial power-down mode operation

  • Latch-up performance exceeds 100 mA per JESD78D Class II

  • Complies with JEDEC standard:

    • JESD8-12 (0.9 V to 1.3 V)

    • JESD8-11 (1.4 V to 1.6 V)

    • JESD8-7 (1.65 V to 1.95 V)

    • JESD8-5 (2.3 V to 2.7 V)

    • JESD8C (2.7 V to 3.6 V)

    • JESD12-6 (4.5 V to 5.5 V)

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2500 V

    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1500 V

  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Applications

  • General purpose I/O level translation

  • Noisy environments or slow input signals

  • Supports push-pull voltage translation for clock signaling

  • Consumer

参数类型

型号 VCC(A) (V) VCC(B) (V) Logic switching levels Output drive capability (mA) tpd (ns) Nr of bits Power dissipation considerations Tamb (°C) Package name Category
NXU0101GW 0.9 - 5.5 0.9 - 5.5 CMOS/LVTTL ± 12 8.1 4 ultra low -40~125 TSSOP6 Uni-directional | Schmitt-trigger

封装

型号 可订购的器件编号，（订购码(12NC)） 状态 标示 封装 外形图 回流焊/波峰焊 包装
NXU0101GW NXU0101GWH
(935691953125)		 Active L1 SOT363-2
TSSOP6
(SOT363-2) 		SOT363-2 SOT363-2_125

环境信息

型号 可订购的器件编号 化学成分 RoHS RHF指示符
NXU0101GW NXU0101GWH NXU0101GW rohs rhf rhf
品质及可靠性免责声明

Series

文档 (6)

文件名称 标题 类型 日期
NXU0101 1-bit dual-supply buffer/level ranslator with Schmitt-trigger; 3-state Data sheet 2024-10-30
AN90057 Pin FMEA for NXU family Application note 2024-09-11
SOT363-2 3D model for products with SOT363-2 package Design support 2023-02-02
nxu0101 NXU0101 IBIS model IBIS model 2024-10-31
SOT363-2 plastic thin shrink small outline package; 6 leads; body width 1.25 mm Package information 2022-11-21
SOT363-2_125 TSSOP6 ; Reel pack for SMD, 7"; Q3/T4 product orientation Packing information 2022-11-04

支持

如果您需要设计/技术支持，请告知我们并填写 应答表 我们会尽快回复您。

模型

文件名称 标题 类型 日期
nxu0101 NXU0101 IBIS model IBIS model 2024-10-31
SOT363-2 3D model for products with SOT363-2 package Design support 2023-02-02

订购、定价与供货

型号 Orderable part number Ordering code (12NC) 状态 包装 Packing Quantity 在线购买
NXU0101GW NXU0101GWH 935691953125 Active SOT363-2_125 3,000 订单产品

样品

作为 Nexperia 的客户，您可以通过我们的销售机构订购样品。

如果您没有 Nexperia 的直接账户，我们的全球和地区分销商网络可为您提供 Nexperia 样品支持。查看官方经销商列表。

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

交互式数据手册

可订购部件

型号 可订购的器件编号 订购代码(12NC) 封装 从经销商处购买
NXU0101GW NXU0101GWH 935691953125 SOT363-2 订单产品