双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

74ALVCH16373DGG

2.5 V/3.3 V 16-bit D-type transparent latch; 3-state

The 74ALVCH16373 is a 16-bit D-type transparent latch with bus hold inputs and 3-state outputs. The device can be used as two 8-bit transparent latches or a single 16-bit transparent latch. The device features two latch enables (1LE and 2LE) and two output enables (1OE and 2OE), each controlling 8-bits. When nLE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When nLE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of nLE. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Operation of the nOE input does not affect the state of the latches.

This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.

Features and benefits

  • Wide supply voltage range from 1.2 V to 3.6 V

  • CMOS low power dissipation

  • MULTIBYTE™ flow-through standard pin-out architecture

  • Low inductance multiple VCC and GND pins for minimum noise and ground bounce

  • Direct interface with TTL levels

  • All data inputs have bus hold

  • Latch-up performance exceeds 100 mA per JESD78 Class II.A

  • Output drive capability 50 Ω transmission lines at 85 °C

  • Current drive ±24 mA at VCC = 3.0 V

  • Complies with JEDEC standards:

    • JESD8-7 (1.65 V to 1.95 V)

    • JESD8-5 (2.3 V to 2.7 V)

    • JESD8C/JESD36 (2.7 V to 3.6 V)

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V
    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

参数类型

型号 VCC (V) Logic switching levels Output drive capability (mA) tpd (ns) Power dissipation considerations Tamb (°C) Package name
74ALVCH16373DGG 2.3 - 3.6 LVTTL ± 24 2.1 low -40~85 TSSOP48

PCB Symbol, Footprint and 3D Model

Model Name 描述

封装

型号 可订购的器件编号，（订购码(12NC)） 状态 标示 封装 外形图 回流焊/波峰焊 包装
74ALVCH16373DGG 74ALVCH16373DGG:11
(935205120118)		 Active ALVCH16373 SOT362-1
TSSOP48
(SOT362-1) 		SOT362-1 SSOP-TSSOP-VSO-WAVE
SOT362-1_118

环境信息

型号 可订购的器件编号 化学成分 RoHS RHF指示符
74ALVCH16373DGG 74ALVCH16373DGG:11 74ALVCH16373DGG rohs rhf rhf
品质及可靠性免责声明

Series

文档 (9)

文件名称 标题 类型 日期
74ALVCH16373 2.5 V/3.3 V 16-bit D-type transparent latch; 3-state Data sheet 2024-06-18
SOT362-1 3D model for products with SOT362-1 package Design support 2020-01-22
alvch16373 alvch16373 IBIS model IBIS model 2013-04-08
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
TSSOP48_SOT362-1_mk plastic, thin shrink small outline package; 48 leads; 0.5 mm pitch; 12.8 mm x 6.1 mm x 1.2 mm body Marcom graphics 2017-01-28
SOT362-1 plastic thin shrink small outline package; 48 leads; body width 6.1 mm Package information 2024-01-05
SOT362-1_118 TSSOP48; Reel pack for SMD, 13''; Q1/T1 product orientation Packing information 2020-04-21
74ALVCH16373DGG_Nexperia_Product_Reliability 74ALVCH16373DGG Nexperia Product Reliability Quality document 2024-06-16
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

支持

如果您需要设计/技术支持，请告知我们并填写 应答表 我们会尽快回复您。

模型

文件名称 标题 类型 日期
alvch16373 alvch16373 IBIS model IBIS model 2013-04-08
SOT362-1 3D model for products with SOT362-1 package Design support 2020-01-22

PCB Symbol, Footprint and 3D Model

Model Name 描述

订购、定价与供货

型号 Orderable part number Ordering code (12NC) 状态 包装 Packing Quantity 在线购买
74ALVCH16373DGG 74ALVCH16373DGG:11 935205120118 Active SOT362-1_118 2,000 订单产品

样品

作为 Nexperia 的客户，您可以通过我们的销售机构订购样品。

如果您没有 Nexperia 的直接账户，我们的全球和地区分销商网络可为您提供 Nexperia 样品支持。查看官方经销商列表。

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

交互式数据手册

可订购部件

型号 可订购的器件编号 订购代码(12NC) 封装 从经销商处购买
74ALVCH16373DGG 74ALVCH16373DGG:11 935205120118 SOT362-1 订单产品