双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

74HCT3G07GD

Triple buffer with open-drain outputs

The 74HC3G07; 74HCT3G07 is a triple buffer with open-drain outputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

此产品已停产

Features and benefits

  • Wide supply voltage range from 2.0 V to 6.0 V

  • Input levels:

    • For 74HC3G07: CMOS level

    • For 74HCT3G07: TTL level

  • CMOS low power dissipation

  • High noise immunity

  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

  • Complies with JEDEC standards

    • JESD8C (2.7 V to 3.6 V)

    • JESD7A (2.0 V to 6.0 V)

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

参数类型

型号 Package name
74HCT3G07GD XSON8

封装

下表中的所有产品型号均已停产 。

型号 可订购的器件编号,(订购码(12NC)) 状态 标示 封装 外形图 回流焊/波峰焊 包装
74HCT3G07GD 74HCT3G07GD,125
(935288587125)
Obsolete T07 Standard Procedure Standard Procedure SOT996-2
XSON8
(SOT996-2)
SOT996-2 SOT996-2_125

环境信息

下表中的所有产品型号均已停产 。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
74HCT3G07GD 74HCT3G07GD,125 74HCT3G07GD rohs rhf rhf
品质及可靠性免责声明

文档 (5)

文件名称 标题 类型 日期
74HC_HCT3G07 Triple buffer with open-drain outputs Data sheet 2023-12-13
AN10161 PicoGate Logic footprints Application note 2002-10-29
AN11044 Pin FMEA 74HC/74HCT family Application note 2019-01-09
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT996-2 plastic, leadless extremely thin small outline package; 8 terminals; 0.5 mm pitch; 3 mm x 2 mm x 0.5 mm body Package information 2020-04-21

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

No documents available

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.