双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

74LVCV2G66DP

Overvoltage tolerant bilateral switch

The 74LVCV2G66 is a low-power, low-voltage, high-speed Si-gate CMOS device.

The 74LVCV2G66 provides two single pole single throw analog or digital switches. Each switch includes an overvoltage tolerant input/output terminal (pin nZ), an output/input terminal (pin nY) and low-power active HIGH enable input (pin nE).

The overvoltage tolerant switch terminals allow the switching of signals in excess of VCC. The low-power enable input eliminates the necessity of using current limiting resistors in portable applications when using control logic signals much lower than VCC. These inputs are also overvoltage tolerant.

此产品已停产

Features and benefits

  • Wide supply voltage range from 2.3 V to 5.5 V

  • Ultra low-power operation

  • Very low ON resistance:

    • 8.0 Ω (typical) at VCC = 2.7 V

    • 7.5 Ω (typical) at VCC = 3.3 V

    • 7.3 Ω (typical) at VCC = 5.0 V.

  • 5 V tolerant input for interfacing with 5 V logic

  • High noise immunity

  • Switch handling capability of 32 mA

  • CMOS low-power consumption

  • Latch-up performance exceeds 250 mA

  • Incorporates overvoltage tolerant analog switch technology

  • Switch accepts voltages up to 5.5 V independent of VCC

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

参数类型

型号 Package name
74LVCV2G66DP TSSOP8

封装

下表中的所有产品型号均已停产 。

型号 可订购的器件编号,(订购码(12NC)) 状态 标示 封装 外形图 回流焊/波峰焊 包装
74LVCV2G66DP 74LVCV2G66DP,125
(935274431125)
Obsolete Y66 Standard Procedure Standard Procedure SOT505-2
TSSOP8
(SOT505-2)
SOT505-2 SOT505-2_125

环境信息

下表中的所有产品型号均已停产 。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
74LVCV2G66DP 74LVCV2G66DP,125 74LVCV2G66DP rohs rhf rhf
品质及可靠性免责声明

文档 (7)

文件名称 标题 类型 日期
74LVCV2G66 Overvoltage tolerant bilateral switch Data sheet 2023-08-29
AN10161 PicoGate Logic footprints Application note 2002-10-29
AN11009 Pin FMEA for LVC family Application note 2019-01-09
Nexperia_document_guide_MiniLogic_PicoGate_201901 PicoGate leaded logic portfolio guide Brochure 2019-01-07
SOT505-2 3D model for products with SOT505-2 package Design support 2019-01-18
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT505-2 plastic, thin shrink small outline package; 8 leads; 0.65 mm pitch; 3 mm x 3 mm x 1.1 mm body Package information 2022-06-03

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

文件名称 标题 类型 日期
SOT505-2 3D model for products with SOT505-2 package Design support 2019-01-18

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.