双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

PCMF2DFN1

Common-mode EMI filter for differential channels with integrated ESD protection

The devices are common-mode ElectroMagnetic Interference (EMI) filters with integrated ElectroStatic Discharge (ESD) protection for two and three differential channels. The devices are designed to provide low insertion loss for differential high-speed signals on each channel while unwanted common-mode signals are attenuated.

Each differential channel incorporates two signal lines that are coupled by integrated coils. Diodes provide protection to downstream components from ESD voltages up to ±15 kV on each signal line.

PCMF2DFN1 protects and filters two differential channels and is encapsulated in a DFN2520-9 (SOT1333-1/XSON9) plastic package.

PCMF3DFN1 protects and filters three differential channels and is encapsulated in a DFN4020-14 (SOT1334-1/XSON14) plastic package.

此产品已停产

Features and benefits

  • Two and three differential channels common-mode EMI filter with integrated ESD protection
  • ESD protection up to ±15 kV contact discharge according to IEC 61000-4-2
  • Superior common-mode suppression over a wide frequency range
  • Maximum package height: 0.5 mm

Applications

  • Smartphone, cellular and cordless phone
  • Tablet PC and Mobile Internet Device (MID)
  • MIPI D-PHY as used in Camera Serial Interface (CSI) and Display Serial Interface (DSI)
  • High-Definition Multimedia Interface (HDMI)
  • General-purpose EMI and Radio-Frequency Interference (RFI) filter and downstream ESD protection

文档 (2)

文件名称 标题 类型 日期
PCMF2DFN1_PCMF3DFN1 Common-mode EMI filter for differential channels with integrated ESD protection Data sheet 2014-04-28
AN11303 Integrated Common Mode Filter with ESD protection Application note 2014-05-08

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

No documents available

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.