双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

CBT3245AD

Octal bus switch

The CBT3245A is an 8-pole, single-throw bus switch. The device features a single output enable input (OE) that controls eight switch channels. The switches are disabled when (OE) is HIGH. This device is fully specified for partial power down applications using IOFF.

此产品已停产

Features and benefits

  • 5 Ω switch connection between two ports
  • Direct interface with TTL levels
  • Overvoltage tolerant control inputs to 5.5 V
  • IOFF circuitry provides partial Power-down mode operation
  • Latch-up performance exceeds 500 mA per JESD 78 Class II Level B
  • ESD protection:
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115B exceeds 150 V
    • CDM JESD22-C101C exceeds 1000 V
  • Specified from -40 °C to +85 °C

参数类型

型号 VCC (V) VPASS (V) Logic switching levels RON (Ω) f(-3dB) (MHz) Nr of bits tpd (ns) Power dissipation considerations Tamb (°C)
CBT3245AD 4.5 - 5.5 3.9 TTL 7 300 8 0.25 very low -40~85

PCB Symbol, Footprint and 3D Model

Model Name 描述

封装

下表中的所有产品型号均已停产 。

型号 可订购的器件编号,(订购码(12NC)) 状态 标示 封装 外形图 回流焊/波峰焊 包装
CBT3245AD CBT3245AD,112
(935271059112)
Obsolete no package information
CBT3245AD,118
(935271059118)
Obsolete

环境信息

下表中的所有产品型号均已停产 。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
CBT3245AD CBT3245AD,112 CBT3245AD rohs rhf rhf
CBT3245AD CBT3245AD,118 CBT3245AD rohs rhf rhf
品质及可靠性免责声明

Series

文档 (3)

文件名称 标题 类型 日期
CBT3245A Octal bus switch Data sheet 2022-03-21
AN90010 Pin FMEA for CBT(D) family Application note 2019-10-28
cbt3245a CBT3245A IBIS model IBIS model 2019-01-09

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

文件名称 标题 类型 日期
cbt3245a CBT3245A IBIS model IBIS model 2019-01-09

PCB Symbol, Footprint and 3D Model

Model Name 描述

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.