双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

74HC299DB

8-bit universal shift register; 3-state

The 74HC299 is an 8-bit universal shift register with 3-state outputs. It contains eight edge-triggered D-type flip-flops and the interstage logic necessary to perform synchronous shift-right, shift-left, parallel load and hold operations. The type of operation is determined by the mode select inputs S0 and S1. Pins I/O0 to I/O7 are flip-flop 3-state buffer outputs which allow them to operate as data inputs in parallel load mode. The serial outputs Q0 and Q7 are used for expansion in serial shifting of longer words. A LOW signal on the asynchronous master reset input MR overrides the Sn and clock CP inputs and resets the flip-flops. All other state changes are initiated by the rising edge of the clock pulse. Inputs can change when the clock is either state, provided that the recommended set-up and hold times are observed. A HIGH signal on the 3-state output enable inputs OE1 or OE2 disables the 3-state buffers and the I/On outputs assume a high-impedance OFF-state. In this condition, the shift, hold, load and reset operations can still occur. The 3-state buffers are also disabled by HIGH signals on both S0 and S1, when in preparation for a parallel load operation. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

此产品已停产

Features and benefits

  • CMOS input levels

  • Multiplexed inputs/outputs provide improved bit density

  • Four operating modes:

    • Shift left

    • Shift right

    • Hold (store)

    • Load data

  • Operates with output enable or at high-impedance OFF-state

  • 3-state outputs drive bus lines directly

  • Cascadable for n-bit word lengths

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

PCB Symbol, Footprint and 3D Model

Model Name 描述

封装

下表中的所有产品型号均已停产 。

型号 可订购的器件编号,(订购码(12NC)) 状态 标示 封装 外形图 回流焊/波峰焊 包装
74HC299DB 74HC299DB,112
(935189890112)
Obsolete no package information
74HC299DB,118
(935189890118)
Obsolete

环境信息

下表中的所有产品型号均已停产 。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
74HC299DB 74HC299DB,112 74HC299DB rohs rhf rhf
74HC299DB 74HC299DB,118 74HC299DB rohs rhf rhf
品质及可靠性免责声明

文档 (2)

文件名称 标题 类型 日期
AN11044 Pin FMEA 74HC/74HCT family Application note 2019-01-09
HCT_USER_GUIDE HC/T User Guide User manual 1997-10-31

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

No documents available

PCB Symbol, Footprint and 3D Model

Model Name 描述

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.