双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

IP4359CX4

Dual channel low capacitance high performance ESD protection

The IP4359CX4 is a dual channel low capacitance ElectroStatic Discharge (ESD) protection device, providing protection to downstream components from ESD voltages as high as ±15 kV contact discharge and > ±15 kV air discharge according the IEC 61000-4-2 model, far exceeding standard level 4.

The device is optimized for protection of high speed interfaces such as Universal Serial Bus (USB) 2.0, High Definition Multimedia Interface (HDMI), Digital Visual Interface (DVI) and other interfaces requiring very low capacitance ESD protection.

The device is available in two different heights. 0.61 mm and reduced maximum height of 0.5 mm. Both versions contain identical circuits and show an identical electrical performance. Both ESD protection channels share common ground connections, but are electrically separated, thereby preventing current back drive into the adjacent channel. IP4359CX4 is fabricated using monolithic silicon technology in a single Wafer-Level Chip-Scale Package (WLCSP). These features make the IP4359CX4 ideal for use in applications requiring component miniaturization such as mobile phone handsets and other portable electronic devices.

此产品已停产

Features and benefits

  • Pb-free, RoHS compliant and free of halogen and antimony (Dark Green compliant)
  • 2 ultra low input capacity rail-to-rail ESD protection diodes with C(I/O-GND) = 1.3 pF
  • Rdyn = 0.45 Ω
  • Integrated ESD protection withstanding ±15 kV contact discharge and > ±15 kV air discharge, far exceeding IEC 61000-4-2 level 4
  • Standard height version (0.61 mm) available as IP4359CX4/LF
  • Reduced height version (maximum height of 0.5 mm) available as IP4359CX4/LF-H500
  • 2 × 2 solder ball WLCSP with 0.4 mm pitch

Applications

  • High-speed interface ESD protection such as USB 2.0, HDMI, DVI etc.
  • Interfaces with special requirements on low capacitive ESD protection
  • Interfaces requiring separation of the positive clamping voltage/current path

封装

下表中的所有产品型号均已停产 。

型号 可订购的器件编号，（订购码(12NC)） 状态 标示 封装 外形图 回流焊/波峰焊 包装
IP4359CX4 IP4359CX4/LF,115
(934060057115)		 Obsolete no package information
IP4359CX4/LF,135
(934060057135)		 Obsolete

环境信息

下表中的所有产品型号均已停产 。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
IP4359CX4 IP4359CX4/LF,115 IP4359CX4 rohs rhf rhf
IP4359CX4 IP4359CX4/LF,135 IP4359CX4 rohs rhf rhf
品质及可靠性免责声明

文档 (4)

文件名称 标题 类型 日期
IP4359CX4 Dual channel low capacitance high performance ESD protection Data sheet 2010-08-06
AN10910 Protecting charger interfaces and typical battery charging topologies with external bypass transistors Application note 2021-04-12
nexperia_document_leaflet_WLCSP_201803_CHN WLCSP Chinese Translation Leaflet 2018-04-25
R_10001 Guideline for the laser marking layout of WLCSP devices Report 2021-01-05

支持

如果您需要设计/技术支持，请告知我们并填写 应答表 我们会尽快回复您。

模型

No documents available

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

交互式数据手册