双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

PRTR5V0U4AD

Integrated quad ultra-low capacitance ESD protection

The PRTR5V0U4AD is designed to protect Input/Output (I/O) ports that are sensitive concerning capacitive load, such as USB 2.0, Ethernet, Digital Video Interface (DVI), etc. from destruction by ElectroStatic Discharges (ESD). It provides protection to downstream signal and supply components from ESD voltages as high as +-8 kV (contact discharge).

The PRTR5V0U4AD incorporates four pairs of ultra-low capacitance rail-to-rail diodes plus an additional Zener diode. The rail-to-rail diodes are connected to the Zener diode which allows ESD protection to be independent of the availability of a supply voltage.

The PRTR5V0U4AD is fabricated using thin film-on-silicon technology integrating four ultra-low capacitance rail-to-rail ESD protection diodes in a miniature 6-lead SOT457 package.

此产品已停产

Features and benefits

  • ESD protection compliant to IEC 61000-4-2 level 4, +-8 kV contact discharge
  • Low voltage clamping due to integrated Zener diode
  • Four ultra-low input capacitance (1 pF typical) rail-to-rail ESD protection diodes
  • Small 6-lead SOT457 package

Applications

  • General-purpose downstream ESD protection of high frequency analog signals and high-speed serial data transmission for ports inside:
    • Cellular mobile handsets
    • USB 2.0 and IEEE 1394 ports in PC or notebook
    • Interfaces: DVI and High Definition Multimedia Interface (HDMI)
    • Cordless telephones
    • Wireless data systems: Wide Area Network (WAN) and Local Area Network (LAN)
    • Personal Digital Assistants (PDAs)

文档

No documents available

支持

如果您需要设计/技术支持，请告知我们并填写 应答表 我们会尽快回复您。

模型

No documents available

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

交互式数据手册