双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

PHK24NQ04LT

此产品已停产

参数类型

型号 Package version Package name Product status Release date
PHK24NQ04LT SOT96-1 SO8 End of life 2010-06-30

封装

下表中的所有产品型号均已停产 。

型号 可订购的器件编号,(订购码(12NC)) 状态 标示 封装 外形图 回流焊/波峰焊 包装
PHK24NQ04LT PHK24NQ04LT,118
(934057265118)
Obsolete K24NQ04 Diffusion Batch Number n**** SOT96-1
SO8
(SOT96-1)
SOT96-1 SO-SOJ-REFLOW
SO-SOJ-WAVE
WAVE_BG-BD-1
SOT96-1_118
PHK24NQ04LT,518
(934057265518)
Obsolete K24NQ04 Diffusion Batch Number n**** SOT96-1_518

环境信息

下表中的所有产品型号均已停产 。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
PHK24NQ04LT PHK24NQ04LT,118 PHK24NQ04LT rhf
PHK24NQ04LT PHK24NQ04LT,518 PHK24NQ04LT rohs rhf rhf
品质及可靠性免责声明

文档 (12)

文件名称 标题 类型 日期
AN10874_ZH LFPAK MOSFET thermal design guide, Chinese version Application note 2020-04-30
AN11113_ZH LFPAK MOSFET thermal design guide - Part 2 Application note 2020-04-30
AN11160 Designing RC Snubbers Application note 2023-02-03
AN11261 RC Thermal Models Application note 2021-03-18
AN11599 Using power MOSFETs in parallel Application note 2016-07-13
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SO8_SOT96-1_mk plastic, small outline package; 8 leads; 1.27 mm pitch; 4.9 mm x 3.9 mm x 1.75 mm body Marcom graphics 2017-01-28
SOT96-1 plastic, small outline package; 8 leads; 1.27 mm pitch; 4.9 mm x 3.9 mm x 1.75 mm body Package information 2020-04-21
SO-SOJ-REFLOW Footprint for reflow soldering Reflow soldering 2009-10-08
TN00008 Power MOSFET frequently asked questions and answers Technical note 2023-01-12
SO-SOJ-WAVE Footprint for wave soldering Wave soldering 2009-10-08
WAVE_BG-BD-1 Wave soldering profile Wave soldering 2021-09-08

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

No documents available

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.