双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

74ALVC16244DL

2.5 V / 3.3 V 16-bit buffer/line driver; 3-state

The 74ALVC16244; 74ALVCH16244 is a 16-bit buffer/line driver with 3-state outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. The device features four output enables (1OE, 2OE, 3OE and 4OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state.

Schmitt trigger action on all inputs makes the device tolerant of slow rise and fall times.

This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.

The 74ALVCH16244 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down resistors.

This product has been discontinued

Features and benefits

  • Wide supply voltage range from 1.2 V to 3.6 V

  • CMOS low power consumption

  • MULTIBYTE™ flow-through standard pin-out architecture

  • Low inductance multiple VCC and GND pins for minimum noise and ground bounce

  • Overvoltage tolerant inputs to 5.5 V(74ALVC16244 only)

  • Direct interface with TTL levels

  • IOFF circuitry provides partial Power-down mode operation

  • Bushold on all data inputs(74ALVCH16244 only)

  • Output drive capability 50 Ω transmission lines at 85 °C

  • Current drive ±24 mA at 3.0 V

  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

  • Latch-up performance exceeds 2500 mA per JESD 78 Class II.A

  • Complies with JEDEC standards:

    • JESD8-7 (1.65 V to 1.95 V)

    • JESD8-5 (2.3 V to 2.7 V)

    • JESD8C/JESD36 (2.7 V to 3.6 V)

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V
    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V
  • Specified from -40 °C to +85 °C

Parametrics

Type number Package name
74ALVC16244DL SSOP48

PCB Symbol, Footprint and 3D Model

Model Name Description

Package

All type numbers in the table below are discontinued.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
74ALVC16244DL 74ALVC16244DL,118
(935187780118)
Withdrawn / End-of-life ALVC16244 SOT370-1
SSOP48
(SOT370-1)
SOT370-1 SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE
SOT370-1_118
74ALVC16244DL,112
(935187780112)
Obsolete ALVC16244 Not available

Environmental information

All type numbers in the table below are discontinued.

Type number Orderable part number Chemical content RoHS RHF-indicator
74ALVC16244DL 74ALVC16244DL,118 74ALVC16244DL rohs rhf rhf
74ALVC16244DL 74ALVC16244DL,112 74ALVC16244DL rohs rhf rhf
Quality and reliability disclaimer

Documentation (6)

File name Title Type Date
74ALVC_ALVCH16244 2.5 V / 3.3 V 16-bit buffer/line driver; 3-state Data sheet 2024-06-11
alvc16244 alvc16244 IBIS model IBIS model 2013-04-08
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT370-1 plastic, shrink small outline package; 48 leads; 0.635 mm pitch; 15.9 mm x 7.5 mm x 2.8 mm body Package information 2020-04-21
SSOP-TSSOP-VSO-REFLOW Footprint for reflow soldering Reflow soldering 2009-10-08
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
alvc16244 alvc16244 IBIS model IBIS model 2013-04-08

PCB Symbol, Footprint and 3D Model

Model Name Description

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.