74LVC162373ADGG

16-bit D-type transparent latch; 30 Ohm series termination resistors; 5 V tolerant inputs/outputs; 3-state

The 74LVC162373A and 74LVCH162373A are 16-bit D-type transparent latches with 30 Ω termination resistors and 3-state outputs. The 74LVCH162373A has separate D-type inputs with bus hold for each latch. Both devices can be used as two 8-bit transparent latches or a single 16-bit transparent latch. Both devices feature two latch enables (1LE and 2LE) and two output enables (1OE and 2OE), each controlling 8-bits. When nLE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When nLE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of nLE. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Operation of the nOE input does not affect the state of the latches. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments.

Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.

These devices are fully specified for partial power down applications using I_OFF. The I_OFF circuitry disables the output, preventing the potentially damaging backflow current through the devices when they are powered down.

Features and benefits

Overvoltage tolerant inputs to 5.5 V
Wide supply voltage range from 1.2 V to 3.6 V
CMOS low power consumption
Multibyte flow-through standard pinout architecture
Multiple low inductance supply pins for minimum noise and ground bounce
Direct interface with TTL levels
All data inputs have bus hold (74LVCH162373A only)
I_OFF circuitry provides partial Power-down mode operation
Complies with JEDEC standard:
- JESD8-7A (1.65 V to 1.95 V)
- JESD8-5A (2.3 V to 2.7 V)
- JESD8-C/JESD36 (2.7 V to 3.6 V)
ESD protection:
- HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V
- CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V
Specified from -40 °C to +85 °C and -40 °C to +125 °C

Parametrics

Type number	V_CC (V)	Logic switching levels	Output drive capability (mA)	t_pd (ns)	Power dissipation considerations	T_amb (°C)	Package name
74LVC162373ADGG	1.2 - 3.6	TTL	± 12	3.2	low	-40~125	TSSOP48

PCB Symbol, Footprint and 3D Model

Model Name	Description

Package

Type number	Orderable part number, (Ordering code (12NC))	Status	Marking	Package	Package information	Reflow-/Wave soldering	Packing
74LVC162373ADGG	74LVC162373ADGG,11 (935237720118)	Active	LVC162373A	TSSOP48 (SOT362-1)	SOT362-1	SSOP-TSSOP-VSO-WAVE	SOT362-1_118

Environmental information

Type number	Orderable part number	Chemical content	RoHS	RHF-indicator
74LVC162373ADGG	74LVC162373ADGG,11	74LVC162373ADGG

Quality and reliability disclaimer

Series

Documentation (11)

File name	Title	Type	Date
74LVC_LVCH162373A	16-bit D-type transparent latch; 30 Ohm series termination resistors; 5 V tolerant inputs/outputs; 3-state	Data sheet	2024-04-03
AN11009	Pin FMEA for LVC family	Application note	2019-01-09
AN263	Power considerations when using CMOS and BiCMOS logic devices	Application note	2023-02-07
SOT362-1	3D model for products with SOT362-1 package	Design support	2020-01-22
lvc162373a	lvc162373a IBIS model	IBIS model	2013-04-08
Nexperia_package_poster	Nexperia package poster	Leaflet	2020-05-15
TSSOP48_SOT362-1_mk	plastic, thin shrink small outline package; 48 leads; 0.5 mm pitch; 12.8 mm x 6.1 mm x 1.2 mm body	Marcom graphics	2017-01-28
SOT362-1	plastic thin shrink small outline package; 48 leads; body width 6.1 mm	Package information	2024-01-05
SOT362-1_118	TSSOP48; Reel pack for SMD, 13''; Q1/T1 product orientation	Packing information	2020-04-21
74LVC162373ADGG_Nexperia_Product_Reliability	74LVC162373ADGG Nexperia Product Reliability	Quality document	2024-06-16
SSOP-TSSOP-VSO-WAVE	Footprint for wave soldering	Wave soldering	2009-10-08

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name	Title	Type	Date
lvc162373a	lvc162373a IBIS model	IBIS model	2013-04-08
SOT362-1	3D model for products with SOT362-1 package	Design support	2020-01-22

PCB Symbol, Footprint and 3D Model

Model Name	Description

Ordering, pricing & availability

Type number	Orderable part number	Ordering code (12NC)	Status	Packing	Packing Quantity	Buy online
74LVC162373ADGG	74LVC162373ADGG,11	935237720118	Active	SOT362-1_118	2,000	Order product

Sample

As a Nexperia customer you can order samples via our sales organization.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples. Check out the list of official distributors.

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

Interactive datasheet