双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

HEF4515BT

This product has been discontinued

Parametrics

Type number Package name
HEF4515BT SO24

Package

All type numbers in the table below are discontinued.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
HEF4515BT HEF4515BT,652
(933373210652)
Obsolete HEF4515BT Standard Procedure Standard Procedure SOT137-1
SO24
(SOT137-1)
SOT137-1 SO-SOJ-WAVE
WAVE_BG-BD-1
Not available
HEF4515BT,653
(933373210653)
Obsolete HEF4515BT Standard Procedure Standard Procedure Not available

Environmental information

All type numbers in the table below are discontinued.

Type number Orderable part number Chemical content RoHS RHF-indicator
HEF4515BT HEF4515BT,652 HEF4515BT rohs rhf rhf
HEF4515BT HEF4515BT,653 HEF4515BT rohs rhf rhf
Quality and reliability disclaimer

Series

Documentation (7)

File name Title Type Date
HEF4515B_CNV 1-of-16 decoder/demultiplexer with input latches Data sheet 1994-12-31
AN11051 Pin FMEA HEF4000 family Application note 2019-01-09
SOT137-1 3D model for products with SOT137-1 package Design support 2020-01-22
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT137-1 plastic, small outline package; 24 leads; 1.27 mm pitch; 15.4 mm x 7.5 mm x 2.65 mm body Package information 2022-06-21
SO-SOJ-WAVE Footprint for wave soldering Wave soldering 2009-10-08
WAVE_BG-BD-1 Wave soldering profile Wave soldering 2021-09-08

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
SOT137-1 3D model for products with SOT137-1 package Design support 2020-01-22

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.