双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

NXU0304GU12-Q100

4-bit dual-supply voltage level translating buffer; 3-state

The NXU0304-Q100 is a 4-bit, dual-supply level translating buffer with 3-state outputs. It features four data inputs (An and B4), four data outputs (YBn and YA4) and an output enable input (OE).

Both VCCA and VCCB can be supplied at any voltage between 0.9 V and 5.5 V making the device suitable for translating between any of the voltage nodes (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V).

This device facilitates asynchronous communication between data buses. Transmit data with a fixed direction (unidirectionally) from the A bus to the B bus on three channels and from the B bus to the A bus for on one channel. The OE pin can be referenced to VCCA and VCCB domain and when OE pin is set LOW the outputs are disabled and enter a high-impedance OFF-state which isolates the buses. The OE pin can be left floating or externally pulled down to ground to ensure the high-impedance state of the outputs during power up or power down.

This device ensures low static and dynamic power consumption across the entire supply range and is fully specified for partial power down applications using IOFF. The IOFF circuitry prevents potentially damaging backflow current through the device when it is powered down or if one of the power supplies is disconnected (floating).

No power supply sequencing is required and output glitches during power supply transitions are prevented. As a result, glitches will not appear on the outputs for supply transitions during power-up/down.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features and benefits

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

    • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

  • Wide supply voltage range:

    • VCCA: 0.9 V to 5.5 V

    • VCCB: 0.9 V to 5.5 V

  • Low power consumption for supply voltage range 1.1 V to 5.5 V
    • 3 µA (Tamb = 25 °C)
    • 5 µA (Tamb = -40 °C to +125 °C)
  • Schmitt-trigger inputs with integrated static high ohmic pull-down resistor on the input
  • Maximum data rates:

    • 250 Mbps (≥ 1.8 V to 5 V translation)

  • High output drive 12 mA at 5 V

  • Output enable (OE) allows connection to VCCA or VCCB domain

  • Suspend mode when either one of the supply voltages is below 100 mV or disconnected (floating)

  • Low noise overshoot and undershoot <10% of VCCO

  • IOFF circuitry provides partial power-down mode operation

  • Latch-up performance exceeds 100 mA per JESD78D Class II

  • Complies with JEDEC standard:

    • JESD8-12 (0.9 V to 1.3 V)

    • JESD8-11 (1.4 V to 1.6 V)

    • JESD8-7 (1.65 V to 1.95 V)

    • JESD8-5 (2.3 V to 2.7 V)

    • JESD8C (2.7 V to 3.6 V)

    • JESD12-6 (4.5 V to 5.5 V)

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2500 V

    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1500 V

  • Similar functions: NXU0104 and NXU0204

  • DHVQFN package with Side-Wettable Flanks enabling Automated Optical Inspection (AOI) of solder joints

Applications

  • General purpose I/O level translation
  • Noisy environments or slow input signals
  • Supports push-pull voltage translation as UART, SPI and JTAG protocols
  • Consumer

Parametrics

Type number VCC(A) (V) VCC(B) (V) Logic switching levels Output drive capability (mA) tpd (ns) Nr of bits Power dissipation considerations Tamb (°C) Package name
NXU0304GU12-Q100 0.9 - 5.5 0.9 - 5.5 CMOS/LVTTL ± 12 8.1 4 ultra low -40~125 XQFN12

Package

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
NXU0304GU12-Q100 NXU0304GU12-Q100X
(935691853115)
Active L6 SOT1174-1
XQFN12
(SOT1174-1)
SOT1174-1 SOT1174-1_115

Boards

Part number Description Type Quick links Shop link
Description
This NEVB-NXU0304 evaluation board is designed to evaluate the product performance and behavior of Nexperia NXU0104. The board simulates the device being used in a system by incorporating series resistors and parallel loads on each input/output line. Output enable (OE) is selected with a jumper to pull up to either VCCA or VCCB supply rail and each input has a Schmitt trigger to accommodate slow or noisy input signals with a weak 6.5 MΩ pull-down accommodates floating input signals.
Type
Evaluation board
Quick links
Shop link

Environmental information

Type number Orderable part number Chemical content RoHS RHF-indicator
NXU0304GU12-Q100 NXU0304GU12-Q100X NXU0304GU12-Q100 rohs rhf rhf
Quality and reliability disclaimer

Documentation (8)

File name Title Type Date
NXU0304_Q100 4-bit dual-supply voltage level translating buffer; 3-state Data sheet 2024-08-19
AN90057 Pin FMEA for NXU family Application note 2024-09-11
SOT1174-1 3D model for products with SOT1174-1 package Design support 2021-01-28
nxu0304 NXU0304 IBIS model IBIS model 2024-09-03
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT1174-1 plastic, leadless extremely thin quad flat package; 12 terminals; 0.4 mm pitch; 2 mm x 1.7 mm x 0.5 mm body Package information 2024-04-11
SOT1174-1_115 XQFN12; Reel pack for SMD, 7''; Q1/T1 product orientation Packing information 2020-04-21
UM90041 NXU0104, NXU0204 and NXU0304 evaluation board User manual 2024-09-11

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
nxu0304 NXU0304 IBIS model IBIS model 2024-09-03
SOT1174-1 3D model for products with SOT1174-1 package Design support 2021-01-28

Ordering, pricing & availability

Type number Orderable part number Ordering code (12NC) Status Packing Packing Quantity Buy online
NXU0304GU12-Q100 NXU0304GU12-Q100X 935691853115 Active SOT1174-1_115 4,000 Order product

Sample

As a Nexperia customer you can order samples via our sales organization.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples. Check out the list of official distributors.

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
NXU0304GU12-Q100 NXU0304GU12-Q100X 935691853115 SOT1174-1 Order product