双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

74ALVT162823DL

18-bit bus-interface D-type flip-flop with reset and enable with 30 Ohm termination resistors; 3-state

The 74ALVT162823 is an 18-bit positive-edge triggered D-type flip-flop with 30 Ω termination resistors, 3-state outputs reset and enable.

The device can be used as two 9-bit flip-flops or one 18-bit flip-flop. The device features clock (nCP), clock enable (nCE), master reset (nMR) and output enable (nOE, inputs each controlling 9-bits. When nCE is LOW, the flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (nCP) transition. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Operation of the nOE input does not affect the state of the flip-flops. A LOW on nMR will reset the flip-flops LOW. Bus hold data inputs eliminate the need for external pull-up resistors to define unused inputs.

This product has been discontinued

Features and benefits

  • Two sets of high speed parallel registers with positive edge-triggered D-type flip-flops

  • 5 V I/O compatible

  • Ideal where high speed, light loading or increased fan-in are required with MOS microprocessors

  • Bus hold data inputs eliminate the need for external pull-up resistors to hold unused inputs

  • Live insertion and extraction permitted

  • Power-up 3-state

  • Power-up reset

  • Output capability: +12 mA to −12 mA

  • Outputs include series resistance of 30 Ω making external termination resistors unnecessary

  • Latch-up protection:

    • JESD78: exceeds 500 mA

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

  • Specified from -40 °C to +85 °C

Parametrics

Type number Package name
74ALVT162823DL SSOP56

Package

All type numbers in the table below are discontinued.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
74ALVT162823DL 74ALVT162823DL,112
(935261659112)
Obsolete ALVT162823 Standard Procedure Standard Procedure SOT371-1
SSOP56
(SOT371-1)
SOT371-1 SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE
Not available
74ALVT162823DL,118
(935261659118)
Obsolete ALVT162823 Standard Procedure Standard Procedure Not available
74ALVT162823DL,512
(935261659512)
Obsolete ALVT162823 Standard Procedure Standard Procedure Not available
74ALVT162823DL,518
(935261659518)
Obsolete ALVT162823 Standard Procedure Standard Procedure Not available

Environmental information

All type numbers in the table below are discontinued.

Type number Orderable part number Chemical content RoHS RHF-indicator
74ALVT162823DL 74ALVT162823DL,112 74ALVT162823DL rhf
74ALVT162823DL 74ALVT162823DL,118 74ALVT162823DL rhf
74ALVT162823DL 74ALVT162823DL,512 74ALVT162823DL rohs rhf rhf
74ALVT162823DL 74ALVT162823DL,518 74ALVT162823DL rohs rhf rhf
Quality and reliability disclaimer

Documentation (7)

File name Title Type Date
74ALVT162823 18-bit bus-interface D-type flip-flop with reset and enable with 30 Ω termination resistors; 3-state Data sheet 2024-06-25
alvt162823 alvt162823 IBIS model IBIS model 2013-04-08
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT371-1 plastic, shrink small outline package; 56 leads; 0.635 mm pitch; 18.45 mm x 7.5 mm x 2.8 mm body Package information 2020-04-21
SSOP-TSSOP-VSO-REFLOW Footprint for reflow soldering Reflow soldering 2009-10-08
alvt16 alvt16 Spice model SPICE model 2013-05-07
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
alvt162823 alvt162823 IBIS model IBIS model 2013-04-08
alvt16 alvt16 Spice model SPICE model 2013-05-07

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.