双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

74ALVT16543DGG

2.5 V/3.3 V ALVT 16-bit registered transceiver (3-state)

The 74ALVT16543 is a high-performance BiCMOS product designed for VCC operation at 2.5 V or 3.3 V with I/O compatibility up to 5 V. The device can be used as two 8-bit transceivers or one 16-bit transceiver.

The 74ALVT16543 contains two sets of eight D-type latches, with separate control pins for each set. Using data flow from A to B as an example, when the A-to-B Enable (nEAB) input and the A-to-B Latch Enable (nLEAB) input are LOW, the A-to-B path is transparent.

A subsequent LOW-to-HIGH transition of the nLEAB signal puts the A data into the latches where it is stored and the B outputs no longer change with the A inputs. With nEAB and nOEAB both LOW, the 3-State B output buffers are active and display the data present at the outputs of the A latches.

Control of data flow from B to A is similar, but using the nEBA, nLEBA, and nOEBA inputs.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

This product has been discontinued

Features and benefits

  • 16-bit universal bus interface
  • 5 V I/O Compatible
  • 3-State buffers
  • Output capability: +64 mA/-32 mA
  • TTL input and output switching levels
  • Input and output interface capability to systems at 5 V supply
  • Bus-hold data inputs eliminate the need for external pull-up resistors to hold unused inputs
  • Live insertion/extraction permitted
  • Power-up 3-State
  • Power-up reset
  • No bus current loading when output is tied to 5 V bus
  • Latch-up protection exceeds 500mA per JEDEC Std 17
  • ESD protection exceeds 2000 V per MIL STD 883 Method 3015 and 200 V per Machine Model

Applications

Parametrics

Type number Package name
74ALVT16543DGG TSSOP56

Package

All type numbers in the table below are discontinued.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
74ALVT16543DGG 74ALVT16543DGG,112
(935209940112)
Obsolete ALVT16543 Standard Procedure Standard Procedure SOT364-1
TSSOP56
(SOT364-1)
SOT364-1 SSOP-TSSOP-VSO-WAVE
Not available
74ALVT16543DGG,118
(935209940118)
Obsolete ALVT16543 Standard Procedure Standard Procedure SOT364-1_118
74ALVT16543DGGS
(935209940512)
Obsolete ALVT16543 Standard Procedure Standard Procedure Not available
74ALVT16543DGGY
(935209940518)
Obsolete ALVT16543 Standard Procedure Standard Procedure Not available

Environmental information

All type numbers in the table below are discontinued.

Type number Orderable part number Chemical content RoHS RHF-indicator
74ALVT16543DGG 74ALVT16543DGG,112 74ALVT16543DGG rohs rhf rhf
74ALVT16543DGG 74ALVT16543DGG,118 74ALVT16543DGG rohs rhf rhf
74ALVT16543DGG 74ALVT16543DGGS 74ALVT16543DGG rohs rhf rhf
74ALVT16543DGG 74ALVT16543DGGY 74ALVT16543DGG rohs rhf rhf
Quality and reliability disclaimer

Documentation (7)

File name Title Type Date
74ALVT16543 2.5 V/3.3 V ALVT 16-bit registered transceiver (3-state) Data sheet 2004-09-13
SOT364-1 3D model for products with SOT364-1 package Design support 2020-01-22
alvt16543 alvt16543 IBIS model IBIS model 2013-04-08
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT364-1 plastic, thin shrink small outline package; 56 leads; 0.5 mm pitch; 14 mm x 6.1 mm x 1.2 mm body Package information 2022-06-23
alvt16 alvt16 Spice model SPICE model 2013-05-07
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
alvt16543 alvt16543 IBIS model IBIS model 2013-04-08
alvt16 alvt16 Spice model SPICE model 2013-05-07
SOT364-1 3D model for products with SOT364-1 package Design support 2020-01-22

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.